The Kind of snowblower you own mainly decides the throwing range of the system. It is however obvious that a two-stage snowblower unit will have a larger throwing range as compared to the single-stage snowblower. The machine will work in accordance with the features installed for a variety of units available. However, if you are in no position to jack up the investment for buying a new one then here is how to modify the snowblower. The following information will take you through all the necessary steps to put the machine in order for work.
How to Make My Snowblower Throw Snow Farther depends on The power within the unit and the chute length. This determines in particular the throwing range of single, two, or three-stage snow blowers. However, in general, impeller size, clearance area, chute rotation, and outer housing adds to the throwing range.
The features are enhanced in the increasing order of stages of the snowblower. But if the task is to modify the snowblower you already have then the following are some workable tips.
Making the Installed impeller work better
If your machine doesn’t throw far enough or the system clogs up. Here is what you need to do.
The tube located in the middle of the snowblower has an impeller installed. The impeller then rotates and pushes the snow out of the chute. There is always a gap between the blades of the impeller. The snow gets trapped around the edges and this clogs up the system.
The system slows down as a result of doesn’t throw far enough. In extreme cases on how to make snowblower throw further, the system stalls out.
What to do: Take a rubber piece for each edge of the impeller. Bolt it to the edges of each impeller such that it touches the housing of the tube. Or you may also put it a millimeter away from the housing. This way it keeps the inside clean of water and snow and throws it right out of the chute
Impeller Kit: A nice and strong Impeller kit determines the throwing range of snow discharge irrespective of the model you own. You could buy yourself a good one online or at a local hardware store nearby. All it would take is your time, money, and a few working hours for the day.
An impeller kit upscales the performance of your ordinary snowblower to an advanced level and spares you large bucks.
It’s better to save yourself from the exhaustive process and take the machine to the mechanic. This is particularly advised to those who don’t know much about augers. Also replacing the old impeller in order to make my snowblower throw snow farther could be a bit tricky.
Chute Lubricant
After fixing the inside of the snowblower or even if you didn’t have to, use a snowblower chute extension lubricant. A chute lubricant helps increase the efficiency of the system by allowing it to throw the snow farther. The snow flows out of the chute easily and thus maintains a good throwing range.
Even your ordinary kitchen spray can be used to lubricate the chute. This would allow the snow to shoot out of the chute easily and at a greater distance. Spray along the inside of the chute as well as its auger parts and the fan.
Another popular and permanent solution to determine how to make my snowblower throw snow farther is liquid graphite spray. It helps lubricate the chute better than any oil would. Also, This promises less frequent use as compared to regular cooking oil: that is once a week.
Retain correct tension: Retain the correct tension of your idler pulley on the blower auger belt. Also, adjust the scraper bars and skids properly.
In the end, see what technique works best for the model you have since it all depends on the requirement of the model at hand.
Variables that determine Snow Throwing Distance
Impeller Diameter: The larger the diameter the greater will be the throwing distance. The smaller the diameter the smaller will be the throwing distance.
Impeller Kit: Impeller kit installation works best for the wet snow. The kit helps power through slush and doesn’t let the chute clog.
Chute rotation: A 180-degree chute rotation works efficiently. A rust-free snowblower chute extension, impeller, and drum increase snow throwing distance. Thus a 180-degree chute rotation helps on how to make snowblower throw further and prevent rust build-up.
Top Pulley: Install a larger top pulley given the snow depth in your area. However, the size needs to be precise since the runner auger at high rpm causes the gear case to fail.
High rpm: High rpm of the newer snow blower models increases the throwing capacity at about 40%.
Lastly, outer housing, number of blades, clearance between impeller, impeller’s size, and ability of blower to funnel snow also determine throwing range.
Single Stage VS Two-Stage Snowblower
Single-stage gas snow blowers are for the snowfall depth of up to 8 inches and clearing width of up to 20-22 inches. The unit is designed for a flat and medium-sized driveway and sidewalk.
Single-stage electric snowblower works best in areas that receive light snowfall. It is designed for a clearing area of 11 to 18 inches and a snow depth of up to 4 inches. The lightweight, small size, ease of use, and less noise make it a go-to machine under the aforementioned circumstances.
The two-stage snow blower is for the areas where average snowfall goes beyond 8 inches. For long, wide, and hilly areas the machine has a clearing width of 24 to 32 inches. The system has driven wheels, electric start, auger, and impeller as part of its mechanism.
Gas Fuel vs Electric Snow Blower
Snowblowers having gas fuel systems implies a stronger engine. It works through the snow in a shorter period of time as opposed to an electric snow thrower.
To know how to make my snowblower throw snow farther power and high Rpm are perks that come with a newer model. If nothing from the discussion works out for you, the old machine needs to be replaced with a newer one. Which is a good alternative route to take since newer machines are easier to store and maintain through the years.